What is packet loss and how to fix it on Windows 10/11?

• Whenever you access the Internet, your device transmits (sends and receives) data units called packets.
• When some of those packets fail to reach their destination, we call it packet loss.
• For those looking for a quick packet loss fix, we've covered several solutions in this article.
• They involve both using Windows 10's toolset and using third-party software.

XINSTALL BY CLICKING THE DOWNLOAD FILE

• Restoro has been downloaded by 0 readers this month.

Compared to a few years ago, the structure of networks has become very complex in nature. In order to increase security, speed, and efficiency, the use of specific protocols has become a necessity.

However, one thing hasn’t changed, and that’s the annoying phenomenon of losing data packets.

Due to various factors, your network might be subject to various disturbances, which often lead to high ping situations and even packet loss.

To identify packet loss in a network, a variety of software solutions are available. They work by detecting packets in some way, such as calculating their travel time or analyzing the packets.

Pinging devices on your network is the simplest way of implementing a packet loss fix, which we will go through later in this article.

Why does packet loss appear on Windows 11?

Many users reported 100% packet loss on their PCs, and this issue can occur on any version of Windows, and it’s usually caused by your network hardware.

This can be a problem and it will cause high latency and ping in games, as well while browsing the web. It’s important to mention that any hub between you and the server can cause this issue.

The issue was reported on all types of connections, and many reported Wi-Fi packet loss on their PCs. However, you can fix these issues, and this guide will show you how to do it.

What is packet loss?

Whenever you access the Internet, your device transmits (sends and receives) data units called packets. If some of those packets fail to reach their destination, we call it packet loss.

This phenomenon can be observed through network slowdowns, disruptions, and even total network connectivity loss.

Although any network service can be targeted by packet loss, it appears that games, VoIP services, as well as multimedia streaming services are more affected.

The reason why these types of apps are more likely to suffer from packet loss is that they process packets in real-time.

What causes packet loss?

• An overloaded network: high traffic volume over several devices such as routers, servers, and terminals.
• Unstable devices: if some of the devices on your network have weak or overloaded CPUs, said devices become unable to process data entirely. This can affect your whole network and be a cause of packet loss.
• Software/firmware issues: glitches in a network device’s software can lead to packet loss, which can affect the whole network.
• Hardware-related issues: low-quality cables, faulty RAM module, outdated network adapter, these can all contribute to causing packet loss.

There are many factors that can play a role in packet loss occurring on your connection. However, the ones above are among the most common ones.

How to test for packet loss?

1. Use specialized software such as PRTG Network Monitor

Launch PRTG and log into it

Observe any faults or malfunctions with your network devices (high ping/packet loss)

PRTG Network Monitor is a complex tool for Windows 10 and also 11 that can perform an extensive analysis of your network and its devices.

Some PC users might still consider it intimidating from a feature standpoint, but it offers an interactive tutorial as soon as you log into it, so you will be just fine.

Its (web) interface comes with a broad range of tools you can work with and even define your own sensors.

For instance, you can stay protected by using the built-in Packet Sniffing Sensor that detects suspicious network packets.

You’ll be glad to know that it has a general trial. During the trial, you can use the app with unlimited sensors (30 days).

After the trial expires, you’ll be limited to 100 sensors.

PRTG Network Monitor

Forget about packet loss and other network problems! Use the best network monitoring tool on the market for your PC!

2. Use Windows’ built-in set of tools

Wait for the pathping operation to complete (can take up to 10 minutes)

Check the created file for high ping values, which can signal packet loss

As hop count increases, your connection gets further away from your PC.

Therefore, the first hop (i.e. hop 0) is your PC, the next hop (hop 1) is your PC-router connection, hop 2 is the connection from your router to your ISP’s line.

After the third hop (hop 2), the connections belong to your ISP’s network.

You should be able to single out the owner of the server judging by the name of the server displayed next to the IP address (check the screenshot).

The last hop is the server you connected to and ran the test against.

Note: If you don’t want to create any log file on your PC (i.e. the packetloss.txt document), you can run the commands listed above without the > C:packetloss.txt and >> c:packetloss.txt bits.

Expert Tip: Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

Doing so will only display results in the command prompt.

How to fix packet loss in Windows 10 and 11?

When your Windows 10 or Windows 11 PC is underperforming due to packet loss, we are here to help you resolve the issue. We’ve already talked about what packet loss is, how to test for data loss, and what causes network congestion.

It is now time to tackle the situation and apply solutions to avoid long-term bandwidth decreases, bottlenecks, and hardware failures. Follow the steps below for a thorough understanding of the tested solutions our experts applied.

1. Isolate and troubleshoot each hop

There’s no magic fix to packet loss since the pathway between you and your server of choice is long and full of hops.

Therefore, you need to isolate the issue and understand what part of your connection is exactly at fault.

Therefore, the first step would be checking the log file you created earlier or the results in the command prompt window.

There are 5 different scenarios and we’re going to discuss each and every one of them.

1.1. High ping on hop 0 and/or hop 1

If there’s high ping on either or both of these hops, the problem’s on your side.

You need to check that you’re using high-quality Ethernet cables, or, if you’re using Wi-Fi, try using a wired connection and run the test again, to see if there’s any improvement.

Hard-reset your router, and maybe check the configuration of your PC’s network adapter. You need to check every single component between your PC and router carefully, including the two ends of that connection (i.e. your PC and your router).

1.2. High ping on hop 2

As we’ve stated before, hop 2 stands for your router-ISP line connection.

Therefore, if there’s nothing wrong with your router, then it might be the cable that belongs to your ISP and goes into the WAN port of your router.

In this case, you might want to give your ISP a call and ask them if there seems to be a problem on their side.

1.3. High ping on your ISP hops (e.g. 3, 4, 5)

Again, the only way to fix this is through your ISP. Give them a call, tell them about your findings, and maybe even provide them with some information on your log file.

Remember that neither tracert nor pathping is illegal to use, so don’t be shy and offer your ISP as many details as you can. Your information might be of great value to the support team.

If the high ping is outside of your ISP network you also need to call your ISP and tell them about your findings. Maybe they’ll know how to tackle this situation onward.

1.4. High ping at the last hop

The last hop stands for the server you’ve connected to and running your tests against.

Therefore, if you notice high ping exclusively on this hop, there’s nothing wrong on your side and the server is clearly experiencing some problems.

If you want to, you can contact the service you’re having trouble with and make them aware of the situation.

For instance, if it’s a game server, try contacting the game’s support crew and tell them about your findings.

2. Use a VPN

Using a VPN such as Kape Technologies’ Private Internet Access can help you improve ping and thus curb packet loss, especially if your ISP throttles your connection.

PIA re-routes all of your traffic through its private network of servers, and if your ISP has bad routing, your packet loss issue will likely be fixed.

Not only can this service improve your ping, but it can also protect your privacy, keep your connection secure, away from prying eyes, and lift geo-restrictions for you by spoofing your location.

Private Internet Access

PIA can help you solve packet loss issues and improve your ping while protecting your privacy at the same time.

Packet loss can sometimes be reduced

To wrap this up, if you’re experiencing packet loss, it’s not the end of the world.

Sure, it’s annoying and renders your connection unusable at times, but if you have a bit of patience, you can figure out where the problem is and maybe even fix it.

ncG1vNJzZmivmaOxsMPSq5ypp6Kpe6S7zGinmpubmsFuuM6sqmg%3D